Desktop Model Endurance Testing Machine
Bending Test (Centripetal Clamp Faceplate)
With an effective combination of the clamp and bending radius blocks(R-block), a wide range of bending tests will be performed.
This machine is made for testing in smaller bend radii. There are some objects that can be tested with conventional mandrels.
- ・Linear Test Piece…
- »Cables (Electric Wires, Optical Fibers) »Harness »Cable Guides »Tubes »Wires »Fibers
- ・Planar Test Piece…
- »Flexible Displays »Organic Electroluminescence Devices »Barrier Film »Flexible Printed Circuits
Attachment (Test Jig)
Bending block is usable as clamp.
Operating Range : up to ±90°
Requirements for R-Adjustment : up to R10mm (Free setting per R0.5mm)
Operating Range : up to ±135°
Requirements for R-Adjustment : R10 mm (Fixed),
and up to R11mm (Free setting per R0.5mm)
Operating Range : up to ±180°
Requirements for R-Adjustment : R10 – 50mm (Free setting per R5mm)
[CDMLH-C2BR] Bending Test (Centripetal Clamp Faceplate)
A broad range of bending tests in smaller radii
This machine provides you many different tests that are impossible to conduct with conventional mandrels.
Up to four different bending radii for one R-block
In the case of 4R-block, setting up four different bending radii produces four different tests by changing the block positions from right to left, up and down. (Operating Range : up to ±90°)