Linear Reciprocation Test [DR11MR3-L4S]

DR11MR3-L4S

Desktop Model Endurance Test Machine
Linear Reciprocation Test

Jig Movement

Vertical Movement
Horizontal Movement
Diagonal Movement

Attachment (Test Jig)

Rotary Slide Table

The direction of movement can be changed by rotating the angle according to the direction of movement.
The rotary slide table is fixed with pins (index plunger), so you can change the settings easily.
Linear Reciprocation Cartridge

This jig that repeatedly performs linear reciprocating motion to attached samples such as FPC board.

Composition

Drawing of Completed Assembly

[DR11MR3-L4S] Linear Reciprocation Test

Multi-directional (standard 3 directions) operation with one jig.

Vertical, Horizontal, and diagonal movement test is possible with one linear reciprocation cartridge.
* The movement in other directions can be set by customization.

Set accurate reciprocation distance with cam mechanism.

Accurate stroke is provided by exchanging the plate in the driving flange according to the reciprocating distance.
* Linear distance: ±1-10mm (can be set in increments ±1mm)

Test time saving by test four samples simultaneously.

It is possible to shorten the test time by test not only single samples but also different types of samples simultaneously using four lanes freely.
* Installable sample size
Sample thickness: max. 5mm
Sample width: max. 30mm (clamping part: max. 60mm)
Sample length: min. 25 to max. 100mm